Offshore and onshore project experience for BP, Equinor, ADNOC, Eni, TotalEnergies, BASF, Yara and more: pipelines, reactors, fired heaters and wind energy components.
Featured projects
Oil & Gas, offshore
Midia Gas Development was the first EPCI (engineering, procurement, construction and installation) project in the Romanian sector of the Black Sea in 34 years.
Our team provided quality assurance for the installation of the pipeline and the platform jacket.
Energy, fusion
Our team is engaged in ITER, where 35 nations are collaborating to build the world’s largest tokamak.
A tokamak is a magnetic fusion device designed to prove that fusion can be a large-scale, carbon-free source of energy, based on the same principle that powers the Sun and the stars.
Portfolio
Pipelines, reactors, fired heaters and wind energy components inspected for major operators and EPC contractors, in fabrication yards and on site.
Third-party inspection for BP on pipeline welding: base material traceability, bevel, fit-up and hi-lo checks, preheat and interpass control, welding parameters and cooling records, witnessing of VT, MT, PT, RT, UT, PAUT and TOFD, AUT validation, mechanical tests and field joint coating tests, through to final dossier endorsement.
Third-party inspector for Offshore Technology Center Turkey on the Sakarya gas field pipeline: welding inspection from fit-up to final visual examination, NDT witnessing including AUT validation, mechanical tests, field joint coating tests (cathodic disbondment, indentation, compressive strength) and final dossier review.
Earlier phase of the Sakarya gas field development: third-party inspection of pipeline welding, monitoring of welder IDs, consumables and pass-by-pass parameters, root-to-hot-pass delay and water-cooling records, NDT and AUT validation witnessing and final dossier endorsement.
Client representative for Equinor during pipeline fabrication: surveillance of welding against the specification, NDT and AUT validation witnessing, witnessing of tensile, impact, hardness and metallographic tests, oversight of field joint coating tests and endorsement of the final dossier.
Third-party inspection for ADNOC on pipeline welding for the Hail and Ghasha development: material traceability, joint preparation and fit-up, welding parameter and temperature monitoring, NDT and AUT validation witnessing, mechanical and coating tests, and final dossier review.
Client representative for Eni on pipeline fabrication for Baleine Phase 2: inspection of bevels, fit-up and welding against the pWPS, NDT and AUT validation witnessing, mechanical and field joint coating tests, and endorsement of the final dossier.
QA/QC inspector for TotalEnergies: welding inspection of pipeline joints, calibration and consumable checks, NDT and AUT validation witnessing, mechanical tests, field joint coating tests and final dossier review, following the specification and client requirements.
Client inspector at the fabricator for a reactor of a re-refining plant in Lithuania: supervision of shop fabrication, material traceability, joint preparation, preheat and welding parameter control, visual and dimensional inspection, NDT witnessing and final dossier review.
Resident inspector for BASF and Linde at the fabricator of a partial oxidation reactor: on-site supervision of fabrication to BASF and Linde specifications, welding and temperature control, visual and dimensional inspection, NDT witnessing and final dossier endorsement.
Client representative during the turnaround to replace a primary ammonia reformer: review of contractors’ quality plans and ITPs, supervision of construction and refractory works (brick lining and castables), inspection management, non-conformity follow-up and support to the construction manager.
Client representative for ADNOC Onshore under a technical services agreement: document and material certificate review, calibration checks, visual and dimensional inspection, pressure test and NDT witnessing, coating and dry film thickness inspection, pre-shipment inspection and daily reporting.
Client representative for Iberdrola and Vestas at the bearing manufacturer: hardness and hardening depth tests, magnetic particle testing, surface roughness, dimensional and surface treatment inspection, review of work instructions, personnel qualifications and test equipment calibration, and final inspection.
Client representative at the fabricator of a refinery fired heater: pre-inspection meeting, review of quality plan, drawings, WPSs and welder qualifications, material and consumable checks, witnessing of shop inspections, NDT and hydrostatic test, coating inspection, schedule expediting and final inspection.
Clients
Tell us the scope, the location and the schedule.
